LEWIS Heavy Duty E-Motorcycle Front Disc Brake Rotor, 2.3/3mm Thick, 44mm
-
Free Shipping: On all orders
Size: 203mm*2.3mm/223mm*2.3mm/223mm*3.0mm
Aperture: 44mm for E-Moto Front Wheel
Material: 420 stainless steel.
Laser cut and molded with high precision, low deformation and low induced stress.
The dense perforated design used in the HD rotor effectively increases the heat dissipation area of the rotors.
The 12-spoke support design, coupled with internal triangular reinforcement, increases the support strength at the fixed position of the rotor, reducing the likelihood of fastener loosening caused by rotor resonance.
The surface employs a multifaceted polishing process to ensure uniform smoothness and roughness of the rotor surface.
The edges are chamfered, and all cut surfaces are coated with electrophoretic paint. This not only prevents rust but also to some extent reduces the occurrence of injuries caused by contact with the sharp edges of the rotor, thereby enhancing the safety attributes of the rotor.
Multiple specifications, suitable for front wheel of Surron Light bee, Talaria and EMX.
Your front brake generally does most of the stopping on an e-moto, which makes the front rotor the first place to get the details right. This LEWIS Heavy Duty rotor is for the front wheel of the Surron Light Bee, Talaria and EMX, and the fit starts at the hub.
Confirming the 44mm front hub
The mounting bolt hole distance on this rotor is 44mm, and the aperture is the same figure under another name. Offer the rotor up to your front hub before you open any fluid or pads, since a wrong pattern shows itself immediately and costs you nothing to check at that stage.
Why the fasteners get special attention
Each rotor bolt sits at the point where resonance can work a fastener loose. The 12-spoke support and internal triangular reinforcement strengthen that fixed position, but it is still good general practice to clean the threads, tighten evenly in a star pattern and recheck the bolts after your first few rides.
Stepping from 203mm up to 223mm
You can run 203mm or 223mm at 2.3mm thick, or 223mm at 3.0mm thick. Going larger or thicker usually affects both caliper position and pad clearance, so look at your front mount and pad requirement before settling on a size rather than choosing by diameter alone.
- Material: 420 stainless steel
- Forming: laser cutting and integrated molding
- Track: dense perforations add heat dissipation area
- Polishing: a multifaceted process for a uniform surface
- Edges: chamfered, with electrophoretic paint on all cut surfaces
- Handling: keep oily fingers off the track
Once the wheel is back in, spin it slowly and watch the rotor pass through the caliper. Bed the pads in on the new surface with a run of moderate stops before you ask the front brake for a hard one.
Specifications
| Material | 420 Stainless Steel |
| Mounting Bolt hole Distance Size: | 44mm (for E-Moto Front wheel hub) |
| Sizes | 203mm*2.3mm(283g) / 223mm*2.3mm(347g) / 223mm*3.0mm(441g) / |
| Processing technology: | laser cutting, integrated molding |
| Feature: | 12-spoke support design for improved support strength and weight reduction |
You Might Also Like
LEWIS X-Power Floating Rear Rotor for Surron Light Bee, 223mm, 54mm BCD
LEWIS X-Power Floating Rotor for E-Motorcycle Front Wheel, 2.3mm Thick, 44mm BCD
LEWIS HD-E E-Motorcycle Disc Brake Rotor, 2.3/3mm Thick, 44mm and 54mm BCD
LEWIS Heavy Duty Rear Disc Brake Rotor for Surron Light Bee, 2.3/3mm Thick, 54mm
